Correct use of miniature electric hoist
Inquiries: 4006578795 The miniature electric hoist is small in size, easy to carry, and has a fast lifting speed. The wire rope is 18 meters, but many people do not understand how to use the Chunyu miniature electric hoist correctly. In fact, it is very simple to use the Chunyu mini electric hoist. The following content editor will describe in detail how to use the mini electric hoist correctly.
　　1 Inspection work: The inspection work should be comprehensive. The mechanical parts of the equipment should be checked before lifting. The wire ropes, hooks, stoppers, etc. should be intact. The electrical parts should be checked for electrical leakage and the grounding device should be good. Rainproof sheds should be provided for open-air operations. 　　
　　2 Trial lifting: For the newly installed electric hoist or the installed electric hoist after disassembly and inspection, it should first be run for several times without power (note that before the installation is completed, do not power on the trial run), check whether the parts of each part are operating normally; before normal use , The static load test should be carried out for 10 minutes, and check whether it is normal. 　　
　　3 Operation: The operation of the electric hoist is performed by a dedicated person, and the operator should fully grasp the safe operation regulations; lift the heavy object without overloading; the hook and the cargo are firmly connected, on the vertical line of the center of gravity of the heavy object; Keep the object away from the ground too high. It is strictly forbidden for heavy objects to pass over the person’s head. Do not hang heavy objects in the air during the working gap; each time when lifting heavy objects, stop and check the braking conditions after lifting 10cm from the ground. ; In use, the electric hoist is regularly checked by specialized personnel, and measures are taken in time when faults are found, and carefully recorded. 　　
　　4 Finished use: The electric hoist should stop at the designated position, the hook should be raised, and the power supply should be cut off.